{"id":8533,"date":"2026-10-27T07:39:50","date_gmt":"2026-10-27T07:39:50","guid":{"rendered":"https:\/\/wpachem.com\/?p=8533"},"modified":"2026-10-27T08:02:11","modified_gmt":"2026-10-27T08:02:11","slug":"organic-vs-inorganic-pigments","status":"publish","type":"post","link":"https:\/\/wpachem.com\/ja\/organic-vs-inorganic-pigments\/","title":{"rendered":"Organic vs Inorganic Pigments: 3 Best Rules for Coatings"},"content":{"rendered":"

Organic vs inorganic pigments: not a question of quality.<\/strong> Check three things in order \u2014 what the product must survive, what temperature it meets in processing, and what the colour costs per coloured kilo.<\/p>\n\n\n\n

\"Organic<\/figure>\n\n\n\n

Organic pigments deliver the colour; inorganic pigments deliver durability and opacity<\/em><\/p>\n\n\n\n

The Short Answer<\/h2>\n\n\n\n
Criterion<\/th>Organic<\/th>Inorganic<\/th><\/tr><\/thead>
Colour strength<\/td>Very high, bright and clean<\/td>Moderate, earth and muted shades<\/td><\/tr>
Tinting strength<\/td>High \u2014 a third to a fifth of the weight<\/td>Lower<\/td><\/tr>
Opacity<\/td>Usually transparent<\/td>Usually opaque<\/td><\/tr>
Pigment lightfastness<\/td>Good to excellent, grade by grade<\/td>Excellent and consistent<\/td><\/tr>
Heat stability<\/td>Grade-dependent, 200\u2013300 \u00b0C<\/td>High, mostly above 300 \u00b0C<\/td><\/tr>
Migration risk<\/td>Real for low-cost azo grades<\/td>Low<\/td><\/tr>
Price per kg<\/td>High<\/td>Low to moderate<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

When the shortlist comes down to organic vs inorganic pigments, think of it as a division of labour: inorganic pigments carry durability and opacity, organic pigments carry the colour. Use inorganic where the part must survive sun, heat and chemicals for years; use organic where the shade is the specification. Most formulations use both. Read the table as a filter, not a verdict: two grades of organic yellow can differ by three lightfastness steps and 80 \u00b0C of heat stability.<\/p>\n\n\n\n

Rule 1: Match the Chemistry to the Service Environment<\/h2>\n\n\n\n

Choosing between organic vs inorganic pigments starts with the service environment.Inorganic pigments are metal oxides, chromates and mixed-metal oxides in a crystal lattice \u2014 photochemically and thermally robust, which is why an iron oxide facade holds a decade outdoors. The trade-off is palette: inorganic chemistry concentrates in whites, blacks, earth yellows, reds and a few blues.<\/p>\n\n\n\n

Organic pigments are built on designed carbon chromophores \u2014 azo, phthalocyanine, quinacridone<\/a>, perylene, DPP. The design freedom buys high-chroma colour, and it is also the weakness: the conjugated system that absorbs light can be attacked by UV.<\/p>\n\n\n\n

So the rule is not “organic indoors, inorganic outdoors”: exterior work needs a proven high-performance organic family. One warning \u2014 masstone lightfastness<\/a> can read 7\u20138, while the same grade in a 1:10 white reduction reads 3\u20134. Ask which reduction the figure refers to.<\/p>\n\n\n\n

Rule 2: In Plastics, the Melt Temperature Decides First<\/h2>\n\n\n\n

The polymer rules out half the palette before colour is discussed. Typical windows: PVC 160\u2013200 \u00b0C, PE 180\u2013240 \u00b0C, PP and ABS 220\u2013260 \u00b0C, PA 260\u2013300 \u00b0C, PC 280\u2013320 \u00b0C \u2014 plus 20\u201330 \u00b0C for a hot runner.<\/p>\n\n\n\n

Iron oxide, titanium dioxide, carbon black and chromium oxide are effectively unrestricted. Organics split sharply: phthalocyanine, quinacridone and DPP hold up in engineering polymers, while many low-cost monoazo yellows will not survive a PA or PC melt.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Two filters remain. Migration surfaces after shipment \u2014 bleeding into an adjacent layer or a failed food-contact test \u2014 usually from azo grades in plasticised PVC. Dispersion is the other: organics agglomerate readily, showing as specks and lost strength; a masterbatch grade solves it.<\/p>\n\n\n\n

Rule 3: Compare Cost per Coloured Kilo, Not per Kilo<\/h2>\n\n\n\n

Price per kilogram is the number buyers see and the number that misleads. What decides margin is cost per kilogram of finished coloured material:<\/p>\n\n\n\n

loading (g\/kg of product) \u00d7 delivered price per kg + dispersion and scrap cost per kg<\/p>\n\n\n\n

An organic may cost several times more per kilogram than an iron oxide and still need a third to a fifth of the weight for the same depth; a transparent organic also frees titanium dioxide. Run the comparison at equal colour depth and the gap narrows \u2014 for high-chroma reds and violets it disappears.<\/p>\n\n\n\n

Three levers matter more than the price list: strength consistency between lots, dispersion quality, and MOQ against real consumption. A 5% swing in tinting strength costs more than a 5% price change \u2014 take the loading figure from your own let-down trial, not the datasheet.<\/p>\n\n\n\n

Before You Approve a Grade<\/h2>\n\n\n\n

Ask every supplier for five things in writing, and treat a vague answer as information:<\/p>\n\n\n\n

    \n
  1. CI name and number with the specific grade<\/strong><\/li>\n\n\n\n
  2. Tint lightfastness<\/strong>, with reduction ratio and method<\/li>\n\n\n\n
  3. Heat stability<\/strong> as temperature \u00d7 dwell time \u00d7 polymer<\/li>\n\n\n\n
  4. Migration and bleed<\/strong> in your actual polymer<\/li>\n\n\n\n
  5. Batch-to-batch \u0394E tolerance<\/strong>, including non-conforming lot handling<\/li>\n<\/ol>\n\n\n\n

    Then run a let-down in your own binder or polymer and a machine trial at production conditions. Approve a grade with a lot tolerance, not a colour.<\/p>\n\n\n\n

    Organic vs Inorganic Pigments: Frequently Asked Questions<\/h2>\n\n\n\n

    Do I need inorganic pigment for exterior durability?<\/h3>\n\n\n\n

    No. Quinacridone, DPP, perylene and high-performance phthalocyanine pigments appear in automotive and architectural exterior finishes. Judge the grade on its tint lightfastness value, not on its family.<\/p>\n\n\n\n

    Is inorganic pigment always cheaper?<\/h3>\n\n\n\n

    Per kilogram, usually. Per coloured kilogram, not necessarily: an organic grade needs far less weight for the same depth, and the titanium dioxide it releases covers part of the difference.<\/p>\n\n\n\n

    Where WPAChem Fits<\/h2>\n\n\n\n

    WPAChem supplies the full organic line alongside inorganic grades, so the selection does not have to be split between vendors. \u30d4\u30b0\u30e1\u30f3\u30c8\u30d0\u30a4\u30aa\u30ec\u30c3\u30c819<\/a> is a quinacridone violet for engineering plastics and exterior coatings; \u30e9\u30a4\u30c8\u30d5\u30a1\u30b9\u30c8\u30b9\u30ab\u30fc\u30ec\u30c3\u30c8BBN<\/a> (C.I. Pigment Red 48:1) covers PVC, masterbatch and interior scarlet; pearlescent pigment<\/a> adds the effect layer where the design needs depth.<\/p>\n\n\n\n

    Send the polymer, processing temperature, target shade and market, and we narrow the shortlist before the first shipment \u2014 with a datasheet and a free sample. Our Russian-speaking team and warehouse in Russia keep lead times short. Browse the pigment range<\/a> or write to info@wpachem.com<\/a>.<\/p>\n\n\n\n

    <\/p>","protected":false},"excerpt":{"rendered":"

    Organic vs inorganic pigments: not a question of quality. Check three things in order \u2014 what the product must survive, what temperature it meets in processing, and what the colour costs per coloured kilo. Organic pigments deliver the colour; inorganic pigments deliver durability and opacity The Short Answer Criterion Organic Inorganic Colour strength Very high, bright and clean Moderate, earth and muted shades Tinting strength High \u2014 a third to a fifth of the weight Lower Opacity Usually transparent Usually opaque Pigment lightfastness Good to excellent, grade by grade Excellent and consistent Heat stability Grade-dependent, 200\u2013300 \u00b0C High, mostly above 300 \u00b0C Migration risk Real for low-cost azo grades Low […]<\/p>\n","protected":false},"author":1,"featured_media":8641,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_gspb_post_css":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-8533","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news"],"blocksy_meta":{"styles_descriptor":{"styles":{"desktop":"","tablet":"","mobile":""},"google_fonts":[],"version":8}},"acf":[],"_links":{"self":[{"href":"https:\/\/wpachem.com\/ja\/wp-json\/wp\/v2\/posts\/8533","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wpachem.com\/ja\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wpachem.com\/ja\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/wpachem.com\/ja\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/wpachem.com\/ja\/wp-json\/wp\/v2\/comments?post=8533"}],"version-history":[{"count":6,"href":"https:\/\/wpachem.com\/ja\/wp-json\/wp\/v2\/posts\/8533\/revisions"}],"predecessor-version":[{"id":8635,"href":"https:\/\/wpachem.com\/ja\/wp-json\/wp\/v2\/posts\/8533\/revisions\/8635"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/wpachem.com\/ja\/wp-json\/wp\/v2\/media\/8641"}],"wp:attachment":[{"href":"https:\/\/wpachem.com\/ja\/wp-json\/wp\/v2\/media?parent=8533"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wpachem.com\/ja\/wp-json\/wp\/v2\/categories?post=8533"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wpachem.com\/ja\/wp-json\/wp\/v2\/tags?post=8533"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}